Tutorial News Comments FAQ Related Articles

How to configure Video call service on Elastix

{{postValue.id}}

configuration of Video call service on Elastix

A video call is a phone call using an Internet connection, sometimes called Videotelephony, which utilizes video to transmit a live picture of the person making the call.In this tutorial covers the installation procedure of Video call service on Elastix.

Configure

Enable the direct access so choose the choose Security tab in above. 1 Select 'ON' in "Enable direct access (Non-embedded) to FreePBX: ".then If you need to change DB Password and click on the save. 2 3 Choose the PBX option on the left pane of the dashboard and choose PBX configuration. 4 FreePBX administration page will appear & Then choose the 'Tools --> Asterisk SIP Setting’. 5 Allow our IP-PBX to display a video during a call, we must add the default codecs for video support and configure the extensions to support video. 6 7 After completing the configuration click on the submit changes and apply config. 8 Now video call configuration has been completed. Now you can able to configure video call client setup. ​ With this, the method to configure Video call service on Elastix comes to an end.

Tags:
Author: 

Comments ( 1 )

imanmeshkat
Thank you for your video.
went throught that and configured it, but it is not working properly. I can just see my video on my screen and not the other side video.
Add a comment
{{postCtrl.cmtErrMsg}}

Frequently asked questions ( 5 )

Q

How to activate FreePBX on elastix?

A

In order to have access to FreePBX gui (unembedded FreePBX), you have to enable unembedded FreePBX access from within the elastix gui. The way to do this is what is described in the message (security tab-> advanced settings and then switch "Enable direct access (Non-embedded) to FreePBX®:?" to "On").

Q

What is PBX in networking on elastix?

A

A PBX (private branch exchange) is a telephone system within an enterprise that switches calls between enterprise users on local lines while allowing all users to share a certain number of external phone lines.

Q

How to enable Video codecs on elastix?

A

Check to enable and then choose allowed codecs. if you clear each codec and then add them one at a time, submitting with each addition, they will be added in order which will affect the codec priority.

Q

What is meant by nat configuration in elastix?

A

In a client definition. nat=yes|no|never|route. If a peer is configured with nat=yes, it causes Asterisk to ignore the address information in the SIP and SDP headers from this peer, and reply to the sender's IP address and port. nat=yes enables a form of Symmetric RTP and SIP Comedia mode in Asterisk.

Q

How to change my DB admin password on elastix?

A

Choose a security tab-> advanced setting then we can change the DB admin password and click on the save button.

Back To Top!