Tutorial News Comments FAQ Related Articles

How To Configure Trunks On Issabel 4

{{postValue.id}}

To Configure Trunks In Issabel -4

Introduction:

The trunk will handle incoming and outgoing calls; outbound caller id will be displayed in the trunk, and to transfer the call to the outside you can select the trunk name on outbound routes.

Installation Procedure:

Step 1: This is the Dashboard of Issabel Snap 1 Dashboard

Step 2: Click on the PBX and Select the PBX Configuration option Snap 2 PBX Configuration

Step 3: Then Click on the trunks option to select "add sip trunk" from the sub-category of "Add a Trunk"

Snap 3 Trunks Sip Trunks

Step 4: Fill all the details listed below in the "Add sip truck" category

Snap 4 Adding Sip trunk

Step 5: Once the details are filled save the page by clicking "submit changes".

Snap 5 submit changes

Step 6: Finally click on apply changes. The created "sip truck" can be viewed on the right corner of the page.

Snap 6 clicl on applu hanges

By this configuring trunks in Issabel has come to an end

Tags:
Author: 

Comments ( 0 )

No comments available

Frequently asked questions ( 5 )

Q

What is Issabel PBX?

A

Issabel PBX is a fork of Elastix before they changed their backend. If you are familiar with Elastix, then Issabel will be an easy transition.
Issabel can be set up to handle all your office needs for extensions, queues, IVR, and more.

Q

What is the Match pattern in Issabel?

A

The dialed number will be compared against the prefix, plus this pattern.
Upon a match, this portion of the number will be sent to the trunks after removing the prefix and appending the prepend digits.
You can completely replace a number by matching on the prefix only, replacing it with a prepend, and leaving the match pattern blank.

Q

What is meant by PEER Details of Issabel?

A

Here you give the PEER connection parameters supplied by your VoIP provider.
You may need to add to the provided default settings and in some cases remove default settings depending on your provider or application.

Q

What is trunk in FreePBX?

A

Overview. The Trunks module is where you control connectivity to the PSTN and your VoIP provider(s).
This is where you also control to interconnect other PBXs for multi-site applications. The most common trunks are SIP and DAHDi (or Zap).

Q

What is VoIP trunk?

A

A VoIP trunk gateway is an interface that facilitates the use of plain old telephone service (POTS) equipment, such as conventional phone sets and fax machines, with a voice over IP (VoIP) network.
Commercially manufactured VoIP trunk gateways take the form of self-contained units (boxes) or circuit cards.

Back To Top!